9mm 105 Gr. FP - Sized to .356 (Typical) Other sizes available upon request call or email for options.
A great choice for Steel Challenge type matches.
I have been using Bayou Bullets for my 40 and 45 for years. This year I decided to build 2 steel guns, one for iron sights, and one for open. I have ran a few thousand of the 105's through both guns and love the performance. Just as accurate as my jackets bullets and much more cost effective. Keith Tyler on 31st May 2016
Also tested 115, 124, and 135 Bayous in an M&P and Glock (9mm). These baby flat nose 105 Bayou's were a VERY close second place to the 115 round nose bullets. Very surprising. They shot better out of my M&P than my friend's Glock. Unknown on 14th Apr 2016
Great bullet all around. It likes to go fast for accuracy.
Loaded 6.7 grains of Power Pistol. Nice tight group. Unknown on 30th Dec 2015
I have loaded thousands of this bullet and I shoot it through many different pistols, and I have never had any leading of the barrel. I highly recommend this bullet for reloading. It is extremely accurate using 6 grains of AA#5 from a Glock 17. Dean Lucas on 21st Dec 2015
Very accurate bullet, great for steel challenge. No leading, super clean. David Strickland on 18th Dec 2015
have used before and will use more in future ron k. on 18th Nov 2015
I've been loading the 105gr cast polymer coated bullets primarily for my Glock 42. Cleaning the barrel after shooting these was easy, with no visible leading. I'm loading my next 500 bullets and will be getting more when I use these up, since they are inexpensive, reliable, and accurate.
I have been waiting to write this review because I wanted to get a few more rounds downrange than my first order of 100. I can now safely say these bullets feed well and when loaded to a maximum charge of Unique deliver a little over 950 fps with no pressure signs. I was getting 3" groups at 30 yards.
I recently shot and killed an aggressive copperhead and blew it apart, I'm not worried about these bullets ability to perform when needed.
I am now loading these for target rounds in .357 Sig, as they have a short enough tapered section to provide just enough straight sides to seat them at 1.140" COL and a crimp groove in case you want to try a roll crimp to prevent setback or possibly boost velocity. Unknown on 10th Jul 2015
TESTED 20 RDS. EACH
TITEGROUP 3.7 GRS
CFE PISTOL 5.2 GRS
AUTO COMP 5.2
BEST GROUPS WERE AUTO COMP
ALL WORKED WELL IN BERETTA M9\
CAN YOU FURNISH OTHER SUGGESTED LOADS. Unknown on 11th Feb 2015
I have loaded and shot thousands of these bullets and I have found none better. No leading and great accuracy. Well done to Donnie and crew. Dean Lucas on 6th Aug 2014